Edelbrock Victor 5.0 EFI

Victor 5.0 (4000-8000 rpm)

Designed for 5.0L-based competition EFI engines, the Victor 5.0 EFI aluminum intake manifold is for non-emission, racing applications. Intended for engines modified to produce 400 to 540+ horsepower, this intake manifold features a race-proven design with shorter, larger runners for power to 7500 rpm. Runners are 11.5" long and 50% larger in area than Performer 5.0 #3821 runners. The base features an air-gap design to isolate the manifold from hot oil in the valley, and will accept stock or stock replacement fuel rails. The upper manifold will clear tall valve covers and large fuel pressure regulators. The upper and plenum cover are powder-coated light titanium gray. The base is as-cast and not powder-coated. Designed to work with Edelbrock Victor Jr. or Victor cylinder heads, see page 112. Edelbrock 75mm throttle body is recommended for most applications with no EGR spacer. Larger injectors may be needed depending upon power levels. 1994-95 Mustangs require conversion to ’87-93 inlet systems. Manifold includes throttle cable bracket. Recommended intake gasket: Fel-Pro #1262.