AD Performance
Home | Log InOur Policies | Contact Us | About Us | Forum

Iron Eagle SBC 180cc Port Cylinder Heads *Bare*

Starting at: $324.00

Iron Eagle SBC 180cc Port Cylinder Heads

Small Block Chevy - 180cc Runner, available assembled or bare, 49cc, 64cc or 72cc chambers (please specify), angle or straight plug

***Priced BARE for a single head, 2 are needed for an engine***

The result of three decades of cylinder head development, Iron Eagle heads incorporate features that were previously available only in expensive aluminum cylinder heads. We designed Iron Eagle heads for street performance, bracket racing, oval track competition, and high-performance marine use. We offer five different intake ports - 165cc, 180cc, 200cc, 215cc, and 230cc that cover virtually every engine application. Dart Iron Eagle heads have standard features you don’t get in other factory and aftermarket cast-iron cylinder heads. Long-wearing bronze valve guides (except S/S), multi-angle intake valve seats, and hardened and radiused exhaust seats are standard.

DART Part# 10110010 thru 10220010

Material: Superior iron alloy

DART Combustion Chambers: 49cc, 64cc & 72cc

DART Intake Valve Dia: 2.02”

DART Intake Port volume: 180cc

DART intake Port Dim: 1.910”x 1.120”

Int Port Location: Stock

DART Recommended Intake Gasket: Fel-Pro#’s #1204 (can Not use an OEM type)

DART Exh Valve Dia.: 1.600”

Exh Port volume: 75cc

Exhaust Port Dim: 1.375” x 1.325”

Exh Port Location: Stock Location & Bolt Pattern

DART Recommended Exhaust Gasket: Fel Pro # 1404

Flow, Intake: 222cfm @ .500” lift / 28”

Flow, Exhaust: 175cfm @ .600” lift / 28”

Head Bolts: Stock bolts may be used.

Head Studs: ARP # 134-3601, ARP# 134-4001 or 234-4301 (12pt)

Manifold: Dart Alum Dual Plane (opening 1.125”x1.880”) 5” tall or most aftermarket

Milling: Angle mill .125” safely / .200” = 49cc 1.5, Min. 58cc = .060” (.0065” = 1cc) Flat Mill° (carefully)

Pistons: Most 23°aftermarket pistons.Stock (Stock length = 7.800”)

Push Rod length: Stock (Stock length = 7.800”)

Push Rod Guide Plate: Must only use Comp Cam # 4808 (flat)

Retainers: Steel 1.250” = ( 7° ) 1.437” = (10°)

Spark Plug: Angle or straight, .460” reach, tapered seat, Autolite AR133None1

Spring Cups: None

Spring Pockets: 1.550” OD (.030” deeper max)

Spring Options:1.250S = 110# @ 1.700” / .520” max Comp 981, 1.437D = 130# @ 1.800” / .620” max Comp 987

Valve Angles: Stock


Add to Cart:

  • Model: 10110010
  • Shipping Weight: 44lbs
  • 100 Units in Stock
  • Manufactured by: DART

Please Choose:

Hardware






Chamber Size









This product was added to our catalog on Monday 10 December, 2012.