AFR 385cc Fully CNC Ported Magnum BBC Cylinder Heads

AFR’s Magnum Series

Click to enlarge

As the aftermarket continues to push larger displacement combinations, even 555 CID BBC’s are becoming commonplace with 600+ CID engines more plentiful than ever before. AFR is proud to announce our answer to that with our all new 385 cc Magnum, the largest and highest flowing BBC product in our line-up with flow numbers that are creeping up on many of our competitor’s 18 degree Pro-stock style heads. If you’ve got the displacement we have the head to feed it with an intake port that flirts with 440 CFM at a usable lift-point, and enough complimenting exhaust flow to still maintain over 75% of that number @ .800 lift (335 CFM’s at .800 lift!). While this huge a runner is more clearly aimed at 572 - 632 CID applications, in a light car it could still be considered in 555-565 CID aggressive builds that are built to reliably turn 7800 - 8500 RPM’s (Ti valves recommended over 8000 RPM’s). This head will be best utilized with camshafts in the .780 - .850 range to take full advantage of its impressive higher lift airflow, but the best thing about this head is its ability to also provide the end user with industry leading low and mid-lift flow as well (400+ CFM at .600 lift!). This head of course comes with AFR’s trademark .750 thick head deck, reinforced rocker stud bosses, and is equipped with 2.350 intake / 1.880 tulip exhaust valves. Properly selecting the right cylinder head depends on a large number of variables. Please consult with one of our sales technicians to assist you in making the best choice for your particular application.

Note:

Optional stud girdle required for 2° rolled valve angles and 1” longer head bolts needed on four bottom exhaust bolt holes. Longer pushrods might also be required.(see footnotes here)

 

AFR 385cc BBC CNC Aluminum Cylinder Head Flow Chart

Tested on a 4.600 Bore